 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MODULES F O R S T E P P E R M O T O R S M O D U LES TMCM-0 13 - 42 1-Ax is Moto r Mo unte d Ste p / Dire ctio n Dr iver 1.1 A / 30V wit h RS -485 1 0 mm M A IN CH A R AC T ER IS T IC S INFO The TMCM-013-42 is a step / direction stepper motor driver for integration directly on a 42 mm / NEMA-17 motor. The TMCM013-LA supports 42 mm / NEMA-17 linear actuators. The parameters like motor current and Step resolution can be changed easily using the RS-485 interface with an ASCII protocol (e.g. with Hyperterminal). Also the firmware of the module can be updated via the serial interface. All settings are stored in an internal EEPROM, so that no bus system is required in the application. The module is fully protected and comes with a standalone reference search feature, using the integrated reference ELECTRICAL DATA * up to 1.1A RMS coil current (1.5A peak) * supply voltage 7V to 30V DC * two-phase bipolar motors with 0.3A to 1A coil current * Step / Direction input (5 - 24V signal) with up to 350kHz microstep frequency * driver disable input * RS485 host interface (optional use / use for parameterization) * local input for reference switches * optically isolated inputs for Step, Direction and Disable * up to 256 times adjustable microstep resolution * adjustable standby current * reference search and turn CW / CCW via RS485 * TRINAMIC driver technology: no heatsink required * stallGuardTM for reference search full protection / diagnostics SUPPORTED MOTORS INTERFACE FEATURES switch input or stallGuardTM. The module can be used in step-/direction mode, remote controlled via a RS485 interface, or even as an option in a pseudo DC motor mode. The possibility to adjust the micro step resolution delivers either very high accuracy or high speed. TMCM-013 RS-485 SOFTWARE * ASCII protocol controlled using simple terminal software * Piggy back for 42 mm (NEMA-17) motor or NEMA-17 linear actuator (axis protrudes through board) * RoHS compliant Step/Dir Opto isolation Sequencer programmable Driver TMC246 Step Motor REFSwitches OTHER 7..30V DC 5V Power Supply 2 OR DE R C O DE D E S C RI P T I ON TMCM-013-42 TMCM-013-42-LA TMCM-013-CABLE 1-axis step / direction driver module 1.1A / 30V 1-axis step / direction driver module 1.1A / 30V for linear actuator Cable loom www.trinamic.com - for detailed information and datasheets 24 |
Price & Availability of TMCM-013-CABLE
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |